Saltar al contenido principal

Cambios al paso #3

Editado por Marty Rippens

Edicion aprobada por Marty Rippens

Antes
Después
Sin cambios

Líneas de Paso

[* black] Using the 54 bit driver with PH0 screw driver heada Phillips #0 screwdriver, remove the ten screws from the back panel.
[* black] Using the 54 bit driver with PH0 screw driver heada Phillips #0 screwdriver, remove the ten screws from the back panel.
[* red] Remove the two battery screws (15.6 mm)
[* orange] Two top corner screws (12.5 mm)
[* yellow] Six case screws (9.7mm)