Saltar al contenido principal

Cambios al paso #3

Editado por Ali Abbas

Edicion aprobada por Ali Abbas

Antes
Después
Sin cambios

Líneas de Paso

[* red] Using the Philips head #1 screwdriver, remove the ten screws from the back panelpanel. Two top corner screws (12mm), two battery screws (15mm), and six case screws (10mm).
[* red] Using the Philips head #1 screwdriver, remove the ten screws from the back panelpanel. Two top corner screws (12mm), two battery screws (15mm), and six case screws (10mm).
[* icon_reminder] Note which screws go where. The two largest are on top of the battery, the next two largest go in the upper corners (close to the hinge) while the smaller ones make up the rest of the case.