Saltar al contenido principal

Cambios al paso #4

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Heat an iOpener and apply it to the right edge of the phone for two minutes.
[* black] Insert an opening pick near the top edge of the phone, where you have already sliced the adhesive.
[* black] Slowly guide the pick around the right corner.
[* black] Carefully slide the pick down the right edge of the phone to slice through the adhesive.
[* icon_caution] ***Do not insert the pick more than 1 mm (1/32") along the edge, or you will damage the display assembly.***
+[* black] Repeat the step for the left edge of the phone.