Saltar al contenido principal

Cambios al paso #2

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

[* black] Once the edge is warm to the touch, apply a suction cup close to the edge.
[* black] Lift on the suction cup, and insert an opening pick into the gap.
-[* icon_caution] Be sure not to insert the pick more than 13 mm (0.5 inches), or you will damage the display assembly.
+[* icon_caution] Do not insert the pick more than 13 mm (0.5 inches), or you will damage the display assembly.
[* black] If you have trouble creating a gap, reheat the edge and try again.
[* icon_note] You can also try to use a playing card instead of an opening pick to help make the initial entry.