Saltar al contenido principal

Cambios al paso #1

Editado por Richard Suovanen

Edicion aprobada por Richard Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use an [product|IF145-198-8|iOpener] or heat gun to gently heat the outer edges of the screen.
- [* icon_note] The surfaces near the speaker and microphone (top and bottom respectively) have larger adhesive sections. These areas will require slightly longer heat exposure.
+ [* icon_note] The surfaces near the speaker and microphone (top and bottom respectively) have larger adhesive sections. These areas will require slightly longer heat exposure. Heat will help soften the adhesive securing the display, making it easier to separate. The display should be heated until it's slightly too hot to touch, for roughly two minutes.