Saltar al contenido principal

Cambios al paso #1

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

-[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the left edge of the display for two minutes.
+[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the ***top edge*** of the display for two minutes.
[* icon_note] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.
-[* black] Take note of the adhesive regions before you begin prying:
+[* black] Take note of the following regions before you begin prying:
[* red] Thin adhesive lined against the display panel
[* orange] Thick adhesive
+ [* yellow] The OLED display panel, which is very prone to damage
+ [* green] The display cable, which can be damaged during prying

Imagen 1

Versión Antigua

Nueva Versión

Imagen 3

Ninguna imagen anterior

Añadido