Saltar al contenido principal

Cambios a este Paso

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

[* black] Slide the pick around the corner and continue to cut through the adhesive.
+ [* icon_note] You can cut deeper into the top and bottom bezel areas, as long as the pick does not reach the display panel.
[* black] Leave an opening pick on each side as you continue to the next to prevent the adhesive from resealing.
[* black] Repeat the process until you have sliced around the entire perimeter.
[* icon_caution] Be careful not to insert the pick more than 1.5 mm along the long edges, or you will damage the display assembly.