Saltar al contenido principal

Cambios a este Paso

Editado por Richard Suovanen

Edicion aprobada por Richard Suovanen

Sin cambios

Líneas de Paso

+[* icon_caution] This connector is seated deeply in the frame, so be careful not to damage the connector when performing this step.
[* black] Put the flat end of a [product|IF145-002-2|spudger] under the lip of the press fit connector and lift up to pop the connector free.
-[* black] Remove the [product|IF356-001|LCD screen and digitizer].
+ [* black] Remove the [product|IF356-001|LCD screen and digitizer].
[* icon_reminder] Gently scrape the remaining screen adhesive from your phone. Use gentle heat and a small amount of isopropyl to clean the frame and prep it for the new screen adhesive.