Saltar al contenido principal

Cambios a este Paso

Editado por Richard Suovanen

Edicion aprobada por Richard Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Put the flat end of a spudger under the lip of the press fit connector and lift up to pop the connector free.
[* black] Remove the LCD screen and digitizer assembly.
+[* icon_reminder] Gently scrape the remaining screen adhesive from your phone. Use gentle heat and a small amount of isopropyl to clean the frame and prep it for the new screen adhesive.

Imagen 3

Ninguna imagen anterior

Añadido