Saltar al contenido principal

Cambios a este Paso

Editado por Richard Suovanen

Edicion aprobada por Richard Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use a suction cup to lift one edge of the screen just slightly, creating a small gap between the display and the frame of the phone.
[* black] Insert an opening pick or plastic opening tool into the gap.
[* black] Carefully slide the opening pick around the perimeter of the phone to separate the adhesive.
-[* icon_note] You may need to slide the pick around the perimeter multiple times to fully separate the adhesive. Work slowly and carefully until the display begins to come free.
+[* icon_note] If a shattered screen prevents the suction cup from obtaining an air-tight seal, you may need to apply additional heat, slide the pick around the perimeter multiple times to fully separate the adhesive, and eventually work the screen free. Work slowly and carefully.
[* icon_caution] The digitizer cable will still be attached to the LCD screen and digitizer assembly.