Saltar al contenido principal

Cambios a este Paso

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use a suction cup to lift one edge of the screen just slightly, creating a small gap between the display and the frame of the phone.
-[* black] Insert an opening pick into the gap.
-[* black] Carefully slide the opening pick around the perimeter of the phone to separate the adhesive.
- [* icon_caution] If you plan to re-use the display, don't insert the opening pick more than a few millimeters into the phone, or you may damage the OLED panel underneath the glass. Alternatively, use the edges of playing cards to separate the adhesive, rather than a plastic tool—the cards are softer and require more patience, but are less likely to cause damage.
- [* icon_note] You may need to slide your tool around the perimeter multiple times to fully separate the adhesive. Work slowly and carefully until the display begins to come free.
-[* icon_caution] Gently lift the display, but don't try to fully detach it yet—it is still connected by a ribbon cable lying underneath.
+[* black] Once the edge is warm to the touch, apply a suction cup close to the edge.
+[* black] Lift on the suction cup, and insert an opening pick into the gap.
+[* icon_caution] Be sure not to insert the pick more than 1.5 mm, or you will damage the display assembly.
+[* black] If you have trouble creating a gap, reheat the edge and try again.
+ [* icon_note] You can also try to use a playing card instead of an opening pick to help make the initial entry.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Ninguna imagen anterior

Añadido