Saltar al contenido principal

Cambios a este Paso

Editado por Richard Suovanen

Edicion aprobada por Richard Suovanen

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Insert wisdom here.
+[* black] Use an iOpener or heat gun to gently heat the outer edges of the screen.
+ [* icon_note] The surfaces near the speaker and microphone (top and bottom respectively) have larger adhesive sections. These areas will require slightly longer heat exposure.
+[* black] Attach a suction cup and gently pull the screen up and away from the body of the phone.
+ [* icon_caution] The digitizer cable will still be attached to the LCD screen and digitizer assembly.

Imagen 2

Eliminado