Cambios al paso #1
Editado por Marty Rippens —
Edicion aprobada por Marty Rippens
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Using a |
|---|---|
| + | [* red] Using a Phillips #0 screwdriver, unscrew the two 8mm screws from the panel. |
| [* black] Take a spudger and wedge it between the panel and the base of the device. | |
| [* black] Push down on the spudger until you hear a click sound. | |
| [* black] Slide the spudger along the panel and continue to push down until the panel is completely detached. | |
| - | [* black] Remove the panel |
| + | [* black] Remove the panel. |