Cambios al paso #1
Editado por Adam Lourenco —
Edicion aprobada por Adam Lourenco
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Using a Philips P0 screw driver, unscrew the two 8mm screws from the panel. |
|---|---|
| + | [* black] Take a spudger and wedge it between the panel and the base of the device. |
| + | [* black] Push down on the spudger until you hear a click that the panel has detached from the base. |
| + | [* black] Slide the spudger along the panel and continue to push down until the panel is completely detached. |
| + | [* black] Remove the panel |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido