Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #5

Editado por Jerry Monk

Edicion aprobada por Jake Devincenzi

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the single 28 mm T10 Torx screw securing the rightleft speaker to the rear case.
[* black] Lift the rightleft speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.
[* red] Remove the single 28 mm T10 Torx screw securing the rightleft speaker to the rear case.
[* black] Lift the rightleft speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.