Saltar al contenido principal

Cambios a HTC Vive Facerest Midframe Replacement Introducción

Editado por Adam O'Camb

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios
Thing
Facerest Midframe
Title
HTC Vive Facerest Midframe Replacement
Introduction
The HTC Vive's midframe can crack if the device receives a major drop. This guide will show you how to replace the Vive's midframe.
Use this guide to remove or replace the facerest midframe in the HTC Vive.
You'll need a narrow, long-shaft driver to reach some of the screws in this guide.
Time Required Min
9 minutos
15 minutos
Time Required Max
9 minutos
40 minutos
Imageid
Antes
Después
Conclusion
To reassemble your device, follow these instructions in reverse order.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/HTC%20Vive|Answers community] for troubleshooting help.
Author
Summary
This guide will show you how toRemove or replace the facerest midframe in the HTC Vive's midframe.

Prerrequisitos de Guía

Herramientas

  • T5 Torx Screwdriver x1 added.
  • Spudger x1 added.
  • Phillips PH000 Screwdriver x1 added.
  • T6 Torx Screwdriver x1 removed.
  • Prying and Opening Tool Assortment x1 removed.
  • Phillips #00 Screwdriver x1 removed.

Partes

  • HTC Vive Facerest Midframe x1 added.