Saltar al contenido principal

Cambios a iPhone 7 Plus LCD and Digitizer Replacement Introducción

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Antes
Después
Sin cambios
Dispositivo
[ … ]iPhone 7 Plus
Type
[ … ]replacement
Thing
[ … ]LCD Screen and Digitizer
Title
[ … ]iPhone 7 Plus LCD Screen and Digitizer Replacement
Introduction
Use this guide to replace a cracked or broken screen in an iPhone 7. This includes removing the front-facing camera and sensor assembly, earpiece speaker, display EMI shield, and home/Touch ID sensor assembly—all of which must be transferred to your new display. For an easier repair, replace the display assembly instead by following [https://www.ifixit.com/Guide/iPhone+7+Plus+Display+Assembly+Replacement/67563|this much shorter guide]. [ … ] In either case, it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.
Time Required Min
No hay estimado
Time Required Max
No hay estimado
Imageid
Antes
Después
Difficulty
Moderate
Conclusion
[ … ]To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
[ … ]Replace just the bare front panel—not including the home/Touch ID sensor, front-facing camera and sensor cable, or earpiece speaker—in an iPhone 7 Plus.

Prerrequisitos de Guía

Herramientas

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Spudger x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • iFixit Opening Tools x1 added.

Banderas

  • In Progress added.

Pasos

Step #: 1
Antes
Después