Saltar al contenido principal

Cambios a Quantum ProDrive LPS 240MB IDE HDD (Early '90s) Teardown Introducción

Editado por Dylan Treschl

Edicion aprobada por Dylan Treschl

Antes
Después
Sin cambios
Introduction
This is a teardown, meant for educational purposes, and not fixing. My school donated an old broken IDE hard drive to me to play around with and I want to put it to a good use. I figured people would find the inside of an old 3.5" hard drive cool, just as I did with the first one I disassembled (but didn't post a teardown for). Please note: It is HIGHLY advised to not disassemble any hard drive you plan on using again! Even a single speck of dust on one of the platters can destroy the entire drive, as well as all of your data! As well, I do not take any cautions to prevent ESD destruction to this drive, as it is already dead. Thanks for reading, and enjoy!
Imageid
Antes
Después
Conclusion
To reassemble your device, follow these instructions in reverse order.
Public
No

Herramientas

  • Pro Tech Toolkit x1 (featured) added.
  • 9/32" Socket Wrench x1 added.
  • Slip Joint Pliers x1 added.

Banderas

  • In Progress removed.

Pasos

Step #: 1
Antes
Después
Step #: 2
Antes
Después
Step #: 3
Antes
Después
Step #: 4
Antes
Después
Step #: 5
Antes
Después
Step #: 6
Antes
Después
Step #: 7
Antes
Después
Step #: 8
Antes
Después
Step #: 9
Antes
Después
Step #: 10
Antes
Después
Step #: 11
Antes
Después
Step #: 12
Antes
Después