Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios a MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement Introducción

Editado por Mike K

Aprobación pendiente

Antes
Después
Sin cambios
Imageid
Antes
Después
Conclusion
To reassemble your device, follow these instructions in reverse order.After the bezel adhesive has set, install the display assembly according to the [guide|3103] guide.
To reassemble your device, follow these instructions in reverse order.After the bezel adhesive has set, install the display assembly according to the [guide|3103] guide.
Public
No

Herramientas

  • Metal Straight Edge, 18" Min x1 added.
  • X-ACTO Knife x1 added.
  • Precision Utility Knife x1 removed.
  • Small Roller Pin About 1" Diameter x1 To roll over VHB tape. I used a 30mm socket. removed.
  • Straight Edge x1 removed.