Saltar al contenido principal

Cambios a Accessing LEDs and Switches in Razer Blackwidow Ultimate 2013 Introducción

Editado por Jacob Scoles

Edicion aprobada por Jacob Scoles

Antes
Después
Sin cambios
Title
DisassemblingAccessing LEDs and Switches in Razer Blackwidow Ultimate 2013 Keyboard Housing
Introduction
This guide should be followed in order to access all the components that may need to be replaced. This includes accessing the circuit board, cables, keys, LED, cleaning, and more. While it is not entirely necessary to remove the keyboard housing to replace the keys, it does make it easier.
This guide should be followed in order to access all the components underneath the keys. This includes the backlighting LEDs and the switches underneath the keys. The beginning steps for replacing both components are the same. Therefore the only difference between replacing these components will be the last two steps. Step nine will be used to replace the LEDs while step ten will be used to access the switches either for replacement or adding the aftermarket silencers to the keys.
Time Required Min
5 minutos
10 minutos
Time Required Max
5 minutos
20 minutos
Difficulty
Moderate
Easy
Conclusion
To reassemble your devicekeyboard, follow these instructions in reverse order. There are no special steps to put this back together and it is just as easy to put it back together.
Summary
This guide will demonstrate how to open the keyboard's housing to access allthe switches and the internal componentsLEDs beneath the keys.

Herramientas

  • Metal Spudger Set x1 added.
  • Magnetic Project Mat x1 added.
  • Metal Spudger x1 removed.