Saltar al contenido principal

Cambios a Accessing LEDs and Switches in Razer Blackwidow Ultimate 2013 Introducción

Editado por Brandon Bowmer

Edicion aprobada por Brandon Bowmer

Antes
Después
Sin cambios
Introduction
This guide should be followed in order to access all the components that may need to be replaced. This includes accessing the circuit board, cables, keys, LED, cleaning, and more. While it is not entirely necessary to remove the keyboard housing to replace the keys, it does make it easier. The total time to disassemble the keyboard will take approximately 5 minutes. Tools required are a Phillips screwdriver, a metal spudger, and a plastic spudger.
Time Required Min
5 minutos
Time Required Max
5 minutos

Herramientas

  • Metal Spudger x1 added.
  • Phillips #1 Screwdriver x1 added.