Saltar al contenido principal

Cambios a Patching Surfboard Fiberglass Introducción

Editado por Eric Doster

Aprobación pendiente

Eliminado
Añadido
Sin cambios
Dispositivo
[ ]Surfboard
Type
[ ]repair
Thing
[ ]Fiberglass
Title
[ ]Repairing Surfboard Fiberglass
Introduction
[ ]So a ding is basically any noticeable blemish in the board's fiberglass covering. It usually manifests itself as a cracked windshield like fracture. It could be long and skinny (like my rail dings, typically) or short and wide (if you hit a strategically placed jagged rock). You may also not think you have a ding at all, or anything worrying about, then you start noticing a slight yellow discoloration in a certain area-well, odds are you are letting in a little water in that area. Which affects how your board floats and even maneuvers.
Time Required Min
No hay estimado
Time Required Max
No hay estimado
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
[ ]So I am one of those who is a little careless with my board after a tiring workout. My grip gets a little shaky walking on the beach, maybe up some rocks, and back to the car. Inevitably, it seems, I end up dinging some portion of my board (my fave seems

Banderas

  • In Progress added.
  • Member-Contributed Guide added.

Pasos

Step #: 1
Antes
Después