Repara tus cosas Comunidad Tienda

Cambios a Apple Thunderbolt Display LCD Replacement Introducción

Editado por Calvin Laverty —

Edicion aprobada por Calvin Laverty

Antes
Después
Sin cambios
Introduction
The LCD in the Apple Thunderbolt Display is the very first part that will have to be taken out no matter what piece inside this device has to be replaced. Because of this, it is essential to know how to carefully remove the LCD from the device. Something that should be noted is that even after screws are removed, don't hastily try and pulling the LCD out of its casing because it is still connected to the power and logic board of the display! Once the new screen is in place, make sure that everything is connected like the original LCD was and you're device should be as good as new!

Herramientas

  • T10 Torx Security Bit Screwdriver x1 added.
  • Heavy-Duty Suction Cups (Pair) x1 added.
  • TR 10 Screwdriver x1 removed.
  • 2 x Small Suction Cups x1 removed.