Saltar al contenido principal

Changes to iMac Intel 27" EMC 2639 Stand Replacement Introduction

Editado por tff

Edicion aprobada por tff

Eliminado
Añadido
Sin cambios
Introduction
The late 2012 and 2013 27" iMacs had to be ordered with a VESA mount because they did not have the removable stand. However, there is a third party VESA adaptor available, which I successfully installed. I took a few pictures as I did it. [ … ] parts list (see step 6). [ … ] Yes, I'm guessing this will probably void your warranty. Here's my personal take on Apple products and warranties: if it works when I get it, it's unlikely to have a warranty issue within the warranty time-frame. This comes from experience with between a dozen and 2 dozen Apple products - so, many, but not hundreds. [ … ] I'm sorry, I don't have any experience with 21in iMacs, so I don't know if this will work with them or not.
The late 2012 and 2013 27" iMacs had to be ordered with a VESA mount because they did not have the removable stand. However, there is a third party VESA adaptor available, which I successfully installed. I took a few pictures as I did it. [ … ] parts list (see step 6). [ … ] Yes, I'm guessing this will probably void your warranty. Here's my personal take on Apple products and warranties: if it works when I get it, it's unlikely to have a warranty issue within the warranty time-frame. This comes from experience with between a dozen and 2 dozen Apple products - so, many, but not hundreds. [ … ] I'm sorry, I don't have any experience with 21in iMacs, so I don't know if this will work with them or not.
Public
No

Herramientas

  • iMac Intel 27" EMC 2546 and EMC 2639 Adhesive Strips x1 added.
  • Plastic Cards x1 added.
  • Spudger x1 added.
  • T10 Torx Screwdriver x1 added.
  • T25 Torx Screwdriver x1 added.
  • T5 Torx Screwdriver x1 added.
  • T9 Torx Screwdriver x1 added.

Partes

  • VESA mount adaptor x1 added.