Saltar al contenido principal

Cambios a MacBook Pro 15" Unibody Mid 2010 Heat Sink Replacement Introducción

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios
Thing
Heat Sink
Title
Installing MacBook Pro 15" Unibody Mid 2010 Heat Sink
Introduction
Replacing the heat sink requires removal of the logic board and application of new thermal paste.
Difficulty
Moderate
Difficult
Conclusion
1
Public
No
Summary
Replace your MacBook Pro's heat sink.

Prerrequisitos de Guía

Herramientas

  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.
  • Tri-wing Screwdriver 0 x1 added.