Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios a Mercedes W123 Brake Reservoir Rubber Seals Replacement Introducción

Editado por Nicolas Siemsen

Edicion aprobada por Nicolas Siemsen

Antes
Después
Sin cambios
Dispositivo
[ … ]Mercedes W123
Type
[ … ]replacement
Thing
[ … ]Brake Reservoir Rubber Seals
Title
[ … ]Mercedes W123 Brake Reservoir Rubber Seals Replacement
Introduction
[ … ]The seals that cover the sensor floats for brake fluid level and the plugs between the master cylinder and the brake fluid reservoir are pretty easy to forget about when they are doing their job. But one day you'll be trying to pressure bleed or flush your brakes and you'll find brake fluid gushing out! Or, you'll find slow leaks of brake fluid when checking your oil or doing other service under the head. Nip this in the bud early on as brake fluid will ruin any paint it touches! The seals are fairly simple to replace, and this guide will help.
Time Required Min
30 minutos
Time Required Max
30 minutos
Difficulty
Moderate
Conclusion
[ … ]After your first drive check for leaks.
Author
Public
No
Summary
[ … ]There are two sets of rubber seals that keep brake fluid inside of your brake fluid reservoir. If they deteriorate enough from age they make it hard to pressure bleed your brakes and may leak while driving. Replace them before they cause a problem.

Banderas

  • In Progress added.

Pasos

Step #: 1
Antes
Después