Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios a iMac Intel 24" EMC 2267 Graphics Card Replacement Introducción

Editado por Jeff Dickson

Edicion aprobada por Jeff Dickson

Antes
Después
Sin cambios
Introduction
When the VRAM on my early-2009 24" iMac went bad, I feared I might need to trash the machine. Some sources suggested the video card was soldered to the logic board but that may only be true of the base-model iMac. The ones with the nVidia and ATI upgrades are repairable/upgradable as illustrated in this guide. [ … ] You'll need to open the iMac, disconnectThis guide will illustrate disconnecting all cables from the logic board, remove removing all retaining screws from the logic board, remove removing the logic board, then replace and replacing the video card.
When the VRAM on my early-2009 24" iMac went bad, I feared I might need to trash the machine. Some sources suggested the video card was soldered to the logic board but that may only be true of the base-model iMac. The ones with the nVidia and ATI upgrades are repairable/upgradable as illustrated in this guide. [ … ] You'll need to open the iMac, disconnectThis guide will illustrate disconnecting all cables from the logic board, remove removing all retaining screws from the logic board, remove removing the logic board, then replace and replacing the video card.