Saltar al contenido principal

Cambios a Nook BNRV300 Back Cover Replacement Introducción

Editado por Emily Tracy

Edicion aprobada por Emily Tracy

Antes
Después
Sin cambios
Introduction
To replace any of your Nook’s other components, you must first remove the back cover. This guide demonstrates the steps you will need in order to remove the Nook BNRV300 back cover. This device is also called the “Nook Simple Touch.”
Before working on your device, remove the microSD card (if there is one). This will protect the memory of your card. The microSD card is located in a slot on the upper right side of the device.
This guide will enable access to the [https://www.ifixit.com/Guide/Nook+BNRV300+Battery+Replacement/127760|battery], [https://www.ifixit.com/Guide/Nook+BNRV300+Motherboard+Replacement/127953|motherboard], [https://www.ifixit.com/Guide/Nook+BNRV300+Display+Replacement/127955|display], and home button [ADD LINKS TO THESE REPLACEMENT GUIDES].