Saltar al contenido principal

Cambios a ZTE Blade Z Max Fingerprint Sensor Replacement Introducción

Editado por Ronald Weimar

Edicion aprobada por Ronald Weimar

Eliminado
Añadido
Sin cambios
Introduction
guide will require some disassembly of the phone as the ribbon cable connector for the fingerprint sensor is very straightforward. Only simple pry tools and a little glue are needed to complete this replacement. under the metal piece that encloses the motherboard.
guide will require some disassembly of the phone as the ribbon cable connector for the fingerprint sensor is very straightforward. Only simple pry tools and a little glue are needed to complete this replacement. under the metal piece that encloses the motherboard.
Time Required Min
5 minutos
40 minutos
Time Required Max
5 minutos
40 minutos
Difficulty
Easy
Moderate