Saltar al contenido principal

Cambios a Garmin Fenix 3 Display Assembly Replacement Introducción

Editado por Adam Estabrook

Edicion aprobada por Adam Estabrook

Antes
Después
Sin cambios
Introduction
If your watch face is damaged, cracked, or chipped, you can learn how to replace it using this guide. This guide involves simply unscrewing screws from the watch face, and carefully separating the ribbon connector from the motherboard. You will need a T6 Torx screwdriver and a spudger.
If your watch face is damaged, cracked, or chipped, you can learn how to replace it using this guide. This guide involves simply unscrewing screws from the watch face, and carefully separating the ribbon connector from the motherboard. You will need a T6 Torx screwdriver and a spudger.