Saltar al contenido principal

Cambios a Garmin Fenix 3 Display Assembly Replacement Introducción

Editado por Richard Suovanen

Edicion aprobada por Richard Suovanen

Antes
Después
Sin cambios
Introduction
If your watch face is damaged, cracked, or chipped, you can learn how to replace it using this guide. This guide involves simply unscrewing screws from the watch face,face and carefully separatingdisconnecting the screen’s ribbon connectorcable from the motherboard. You will need a T6 Torx screwdriver and a spudger.
If your watch face is damaged, cracked, or chipped, you can learn how to replace it using this guide. This guide involves simply unscrewing screws from the watch face,face and carefully separatingdisconnecting the screen’s ribbon connectorcable from the motherboard. You will need a T6 Torx screwdriver and a spudger.

Banderas

  • Featured Student Guide added.