Saltar al contenido principal

Cambios a DBPOWER T20 Disassembly Introducción

Editado por Andrea Espinosa

Edicion aprobada por Andrea Espinosa

Sin cambios
[ … ]If you need to repair anything on the DBPOWER T20 Projector you need to disassemble it first. This guide will show you all the steps necessary to disassemble the device to a point where items can be replaced. It is quite a sturdy device so don't be afraid to use some force removing the top of the device and the wired. However, use caution around the mirrors inside the device.


  • Long shaft Phillips #2 Screwdriver (8 inches or more) x1 added.