Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios a Memorex CD Alarm Clock Radio PCB Board Replacement Introducción

Editado por Shawn Vernon

Edicion aprobada por Shawn Vernon

Antes
Después
Sin cambios
Thing
MotherboardPCB Board
MotherboardPCB Board
Title
Radio Motherboard PCB Board Replacement
Radio Motherboard PCB Board Replacement
Introduction
the circuit PCB board requires a Phillips #1 screwdriver with at least a 15 cm shaft and a set of tweezers. Make sure there are no batteries in the device and that it is not plugged in before starting the procedure.
the circuit PCB board requires a Phillips #1 screwdriver with at least a 15 cm shaft and a set of tweezers. Make sure there are no batteries in the device and that it is not plugged in before starting the procedure.
Summary
a motherboard PCB board in the Memorex CD Alarm Clock Radio.
a motherboard PCB board in the Memorex CD Alarm Clock Radio.

Prerrequisitos de Guía