Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios a Memorex CD Alarm Clock Radio PCB Board Replacement Introducción

Editado por Shawn Vernon

Edicion aprobada por Shawn Vernon

Antes
Después
Sin cambios
Introduction
[ ]Removing the circuit board requires a Phillips #1 screwdriver with, at least a 15 cm shaft and a set of tweezers. Make sure there are no batteries in the alarm and that it is not plugged in before starting the procedure.
Time Required Min
10 minutos
Time Required Max
10 minutos
Difficulty
Moderate
Easy

Herramientas

  • Phillips 1 Screwdriver with a 15cm or larger shaft x1 added.
  • Tweezers x1 added.