Repara tus cosas Comunidad Tienda

bObi Robotic Vacuum Screen Replacement

Introducción

The step-by-step guide for removing bObi's cover and screen. For help putting bObi back together, refer to: Closing bObi's Cover Post-Repair

Qué necesitas

  1. bObi Robotic Vacuum Screen Replacement, Top Cover: paso 1, imagen 1 de 2 bObi Robotic Vacuum Screen Replacement, Top Cover: paso 1, imagen 2 de 2

    • Remove bObi’s front wheel to access one of the screws holding bObi together.

    • Make sure the wheel is turned closer to bObi's front touch sensors. Use your screwdriver for leverage, and the wheel will pop up and out.

    • Uninstall the larger screw that sits deeper in the wheel compartment.

    Editar

  2. bObi Robotic Vacuum Screen Replacement: paso 2, imagen 1 de 3 bObi Robotic Vacuum Screen Replacement: paso 2, imagen 2 de 3 bObi Robotic Vacuum Screen Replacement: paso 2, imagen 3 de 3

    • Remove bObi's dustbin.

    • Uninstall the 2 screws close to the bin and 2 smaller screws above her main brushes.

    Editar

  4. bObi Robotic Vacuum Screen Replacement: paso 3, imagen 1 de 3 bObi Robotic Vacuum Screen Replacement: paso 3, imagen 2 de 3 bObi Robotic Vacuum Screen Replacement: paso 3, imagen 3 de 3

    • Lift the brush holder. To detach completely, unplug it from bObi.

    • Remove the two screws on the dustbin contact point holder inside bObi.

    • There are 4 screws beneath the main brushes. Uninstall these, and open bObi up to expose her main circuit board.

    Editar

  5. bObi Robotic Vacuum Screen Replacement: paso 4, imagen 1 de 3 bObi Robotic Vacuum Screen Replacement: paso 4, imagen 2 de 3 bObi Robotic Vacuum Screen Replacement: paso 4, imagen 3 de 3

    • Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed.

    Editar

  6. bObi Robotic Vacuum Screen Replacement, Screen: paso 5, imagen 1 de 2 bObi Robotic Vacuum Screen Replacement, Screen: paso 5, imagen 2 de 2

    • Remove the four screws that secure bObi's screen and lift the whole piece out.

    • Put the replacement screen in the open space.

    Editar

  7. bObi Robotic Vacuum Screen Replacement: paso 6, imagen 1 de 2 bObi Robotic Vacuum Screen Replacement: paso 6, imagen 2 de 2
    Editar
Conclusión

To reassemble your device, follow the guide for closing bObi, found here: Closing bObi's Cover Post-Repair

Autor

con 2 otros colaboradores

Chelsea

Miembro Desde 09/24/14

2,278 Reputación

31 Guías creadas

Insignias: 11

+ 8 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 160