Repara tus cosas Comunidad Tienda

Zte Avail 2 Display Replacement

Introducción

Is your phone’s touch screen not working correctly or not responding to your touch? Use this guide to replace your screen and return your device to a working state.

Qué necesitas

  1. Zte Avail 2 Display Replacement, Battery: paso 1, imagen 1 de 3 Zte Avail 2 Display Replacement, Battery: paso 1, imagen 2 de 3 Zte Avail 2 Display Replacement, Battery: paso 1, imagen 3 de 3

    • Before disassembling your ZTE Avail 2, be sure it is powered off.

    • Remove the back cover using the notch at the bottom of the device.

    • Pull the back cover from the front panel gently to remove it.

    Editar

  2. Zte Avail 2 Display Replacement: paso 2, imagen 1 de 2 Zte Avail 2 Display Replacement: paso 2, imagen 2 de 2

    • Remove the battery by the notch in the back plate.

    Editar

  3. Zte Avail 2 Display Replacement, Display: paso 3, imagen 1 de 1

    • Using your J00 screwdriver, unscrew each of the 8 Philips head 1.19mm screws from the black plate of the device.

    Editar

  5. Zte Avail 2 Display Replacement: paso 4, imagen 1 de 2 Zte Avail 2 Display Replacement: paso 4, imagen 2 de 2

    • Using a spudger or plastic opening tool, pull up from underneath the back plate and pop off the piece.

    Editar

  6. Zte Avail 2 Display Replacement: paso 5, imagen 1 de 2 Zte Avail 2 Display Replacement: paso 5, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Using the tweezers remove the 4 orange ribbon cables. Do this by lifting their corresponding black connectors and pulling the ribbon out.

    Editar

  7. Zte Avail 2 Display Replacement: paso 6, imagen 1 de 1

    • On the left side you will see a cellular antenna cable wire. Remove this wire by gently pulling it off.

    Editar

  8. Zte Avail 2 Display Replacement: paso 7, imagen 1 de 1

    • Lift and set aside the motherboard from lying on top of the silver plate (this may require some force because it is held on by adhesive).

    Editar

  9. Zte Avail 2 Display Replacement: paso 8, imagen 1 de 1

    • Using an opening tool, lift and remove the silver metal plate off the back of the device (use some force here).

    Editar

  10. Zte Avail 2 Display Replacement: paso 9, imagen 1 de 1

    • Pry open to separate the metal piece from the front screen attachment using a plastic spudger.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Un comentario

My screen is completely white and I DON'T have to turn the power off, jus the screen off n on n still screen is white. I can't hardly see my apps. Plz tell me what's wrong with my phone. I was thinking somewhere along the lines of my LED cuz everything looks kind of like a negative photo.

Joyce - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 968