Saltar al contenido principal

Zenithink ZTPAD ZT280 C91 Back Panel Replacement

Qué necesitas

  1. Zenithink ZTPAD ZT280 C91 Back Panel Replacement, Back Panel: paso 1, imagen 1 de 1
    • Remove the two screws on the bottom using a Phillips #00 screwdriver.

    • For differentiation purposes, these screws are 4mm long.

  2. Zenithink ZTPAD ZT280 C91 Back Panel Replacement: paso 2, imagen 1 de 3 Zenithink ZTPAD ZT280 C91 Back Panel Replacement: paso 2, imagen 2 de 3 Zenithink ZTPAD ZT280 C91 Back Panel Replacement: paso 2, imagen 3 de 3
    • Using a spudger, start prying the case apart by working around the edge slowly.

    • Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger.

    • While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed

    • Be careful to not damage the speaker cables, they will still be connecting both panels.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 152