Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Zeki Droid Tablet Reflective Screen Replacement

Introducción

Replace the reflective sheet inside of the screen to make images on your tablet clearer.

Qué necesitas

  1. Zeki Droid Tablet Reflective Screen Replacement, Back Casing: paso 1, imagen 1 de 1

    • Remove the back casing by slowly popping each tab out with a plastic opening tool.

    Traducir

  2. Zeki Droid Tablet Reflective Screen Replacement: paso 2, imagen 1 de 1

    • Remove the tapes one by one from the connecting wires with tweezers.

    Traducir

  3. Zeki Droid Tablet Reflective Screen Replacement: paso 3, imagen 1 de 1

    • Remove the black clips from both sides of the casing with a plastic opening tool.

    • The clips should pop off separate from the speakers.

    Traducir

  5. Zeki Droid Tablet Reflective Screen Replacement: paso 4, imagen 1 de 1

    • Remove the speakers from the back casing.

    • Do not tug on the speakers because they are connected to fragile wires.

    Traducir

  6. Zeki Droid Tablet Reflective Screen Replacement: paso 5, imagen 1 de 1

    • Pull the speakers away from the back casing carefullly.

    Traducir

  7. Zeki Droid Tablet Reflective Screen Replacement, Reflective Screen: paso 6, imagen 1 de 2 Zeki Droid Tablet Reflective Screen Replacement, Reflective Screen: paso 6, imagen 2 de 2

    • Use a Phillips #000 screwdriver to remove the three screws from the motherboard.

    • Make sure to keep track of the screws. They are needed to reattach the motherboard at the end.

    Traducir

  8. Zeki Droid Tablet Reflective Screen Replacement: paso 7, imagen 1 de 1

    • Use the plastic opening tool to pull the metal and plastic plates away from the interior of the tablet. Slowly pop each tab off until the plates are mostly separated from the base.

    Traducir

  9. Zeki Droid Tablet Reflective Screen Replacement: paso 8, imagen 1 de 1

    • Separate the white plastic plate from the metal plate by using the plastic opening tool.

    • While these layers are separated, use your tweezers to gently pull the reflective sheet out from in between them.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 2 otros colaboradores

Colleen McFadden

Miembro Desde 03/11/15

268 Reputación

2 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Colorado Springs, Team 2-6, Panko Spring 2015 Miembro de Colorado Springs, Team 2-6, Panko Spring 2015

UCCS-PANKO-S15S2G6

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 814