Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert a fine point tool into the hole on the top left side of the phone to remove the SIM and SD card trays.
-
Pull out the trays.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert a plastic opening tool into the groove between the phone’s back cover and casing.
-
Move the plastic opening tool along the edges of the phone to unclip the two pieces.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the ten 1.2mm screws with a Phillips #000 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Wedge a spudger underneath the battery and gently pry upwards to remove the battery.
-
Once free from the glue, remove from device.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
Equipo
USF Tampa, Team S17-G3, Boczar Spring 2018 Miembro de USF Tampa, Team S17-G3, Boczar Spring 2018
USFT-BOCZAR-S18S17G3
3 Miembros
10 Guías creadas
Un comentario
Although I haven’t yet embarked on this task, I feel more confident in doing so successfully. I have watched the Youtube videos on this and none of them showed such things as the number and placement of the screws. They did give some idea as to the difficulty of it however.
Please continue to produce more of these instructional blurbs.
