Repara tus cosas Comunidad Tienda

ZTE ZMAX Z970 Battery Replacement

Introducción

This guide will show you how to replace the battery on your ZTE ZMAX.

Qué necesitas

  1. ZTE ZMAX Z970 Battery Replacement, Battery: paso 1, imagen 1 de 2 ZTE ZMAX Z970 Battery Replacement, Battery: paso 1, imagen 2 de 2

    • Insert a fine point tool into the hole on the top left side of the phone to remove the SIM and SD card trays.

    • Pull out the trays.

    Editar

  2. ZTE ZMAX Z970 Battery Replacement: paso 2, imagen 1 de 2 ZTE ZMAX Z970 Battery Replacement: paso 2, imagen 2 de 2

    • Insert a plastic opening tool into the groove between the phone’s back cover and casing.

    • Move the plastic opening tool along the edges of the phone to unclip the two pieces.

    Editar

  4. ZTE ZMAX Z970 Battery Replacement: paso 3, imagen 1 de 3 ZTE ZMAX Z970 Battery Replacement: paso 3, imagen 2 de 3 ZTE ZMAX Z970 Battery Replacement: paso 3, imagen 3 de 3

    • Remove the ten 1.2mm screws with a Phillips #000 screwdriver.

    Editar

  5. ZTE ZMAX Z970 Battery Replacement: paso 4, imagen 1 de 2 ZTE ZMAX Z970 Battery Replacement: paso 4, imagen 2 de 2

    • Remove the mid frame with the plastic opening tool.

    Editar

  6. ZTE ZMAX Z970 Battery Replacement: paso 5, imagen 1 de 2 ZTE ZMAX Z970 Battery Replacement: paso 5, imagen 2 de 2

    • Disconnect the battery from the motherboard.

    Editar

  7. ZTE ZMAX Z970 Battery Replacement: paso 6, imagen 1 de 2 ZTE ZMAX Z970 Battery Replacement: paso 6, imagen 2 de 2

    • Wedge a spudger underneath the battery and gently pry upwards to remove the battery.

    • Once free from the glue, remove from device.

    • The glue holding down the battery is strong so work slow and cautiously to avoid starting a fire.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Burak Cengiz

Miembro Desde 02/15/18

480 Reputación

4 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

USF Tampa, Team S17-G3, Boczar Spring 2018 Miembro de USF Tampa, Team S17-G3, Boczar Spring 2018

USFT-BOCZAR-S18S17G3

3 Miembros

10 Guías creadas

Un comentario

Although I haven’t yet embarked on this task, I feel more confident in doing so successfully. I have watched the Youtube videos on this and none of them showed such things as the number and placement of the screws. They did give some idea as to the difficulty of it however.

Please continue to produce more of these instructional blurbs.

aikidoronin - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 1,575