Introducción

Use this guide to replace the charging/AUX board in your ZTE Tempo X smartphone.

Partes

No se requieren partes.

  1. Remove back cover using the divot provided.
    • Remove back cover using the divot provided.

  2. Find the divot near the bottom of the battery and remove the battery from the device.
    • Find the divot near the bottom of the battery and remove the battery from the device.

    • Remove the sixteen 3mm screws using the Phillips #000 screwdriver.

    • Take off the second back cover, lifting from the bottom of the device to the top.

    • Using a spudger, unclip the board from the phone at the places highlighted.

    • Use the spudger to remove the board from the phone.

    • The board is held by glue so there will be resistance when detaching it from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 22

Todo El Tiempo: 79