Saltar al contenido principal

ZTE Lever Front Camera Replacement

Qué necesitas

  1. ZTE Lever Front Camera Replacement, Battery: paso 1, imagen 1 de 1
    • Remove the SD card and the Sim card from the device.

    • The Sim and SD cards are not shown here as our device did not come with them.

  2. ZTE Lever Front Camera Replacement: paso 2, imagen 1 de 2 ZTE Lever Front Camera Replacement: paso 2, imagen 2 de 2
    • Use an iFixit opening tool to separate the back from the device.

  3. ZTE Lever Front Camera Replacement: paso 3, imagen 1 de 2 ZTE Lever Front Camera Replacement: paso 3, imagen 2 de 2
    • Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

    • Remove the cover.

  4. ZTE Lever Front Camera Replacement: paso 4, imagen 1 de 2 ZTE Lever Front Camera Replacement: paso 4, imagen 2 de 2
    • Disconnect the battery cable from the motherboard with a plastic opening tool.

  5. ZTE Lever Front Camera Replacement: paso 5, imagen 1 de 1
    • Use your hands, or a plastic opening tool, to pry the battery from the phone.

  6. ZTE Lever Front Camera Replacement, Front Camera: paso 6, imagen 1 de 2 ZTE Lever Front Camera Replacement, Front Camera: paso 6, imagen 2 de 2
    • Unscrew the three 1.6mm Philllips #0 screws on the plastic cover that are near the top edge of the phone by the camera.

    • Pry off the plastic cover using the iFixit opening tool.

  7. ZTE Lever Front Camera Replacement: paso 7, imagen 1 de 2 ZTE Lever Front Camera Replacement: paso 7, imagen 2 de 2
    • Unplug the front-facing camera press fit connector cable using the iFixit opening tool.

    • Remove the camera from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 111