Repara tus cosas Comunidad Tienda

ZTE Jasper LTE Speaker Replacement

Introducción

This guide shows you have to replace the speaker for the ZTE Jasper LTE phone. You might need to replace the speaker if no audio or sound is distorted.

Qué necesitas

  1. ZTE Jasper LTE Speaker Replacement, Battery: paso 1, imagen 1 de 1

    • Insert the spudger into the bottom left corner of the phone.

    • Use the spudger to loosen the back cover.

    Editar

  2. ZTE Jasper LTE Speaker Replacement: paso 2, imagen 1 de 1

    • Insert the black spudger near the bottom left of the battery. There will be an opening to easily to remove the battery.

    • Continuing to use tool, prop up the battery and remove it.

    Editar

  4. ZTE Jasper LTE Speaker Replacement, Camera: paso 3, imagen 1 de 2 ZTE Jasper LTE Speaker Replacement, Camera: paso 3, imagen 2 de 2

    • Remove nine 0.8mm Phillips #00 screws.

    Editar

  5. ZTE Jasper LTE Speaker Replacement: paso 4, imagen 1 de 2 ZTE Jasper LTE Speaker Replacement: paso 4, imagen 2 de 2

    • Remove the back cover by pulling upwards.

    • Removing the back cover may take a bit of force.

    Editar

  6. ZTE Jasper LTE Speaker Replacement: paso 5, imagen 1 de 3 ZTE Jasper LTE Speaker Replacement: paso 5, imagen 2 de 3 ZTE Jasper LTE Speaker Replacement: paso 5, imagen 3 de 3

    • Disconnect the gold component attached to the camera by pulling upwards using the tweezers.

    • Remove the camera using the tweezers by gripping tightly around the camera and pulling upwards.

    • Camera is attached to the motherboard with adhesive. As such, you may need to use light force to remove the camera.

    Editar

  7. ZTE Jasper LTE Speaker Replacement, Speaker: paso 6, imagen 1 de 2 ZTE Jasper LTE Speaker Replacement, Speaker: paso 6, imagen 2 de 2

    • Remove the speaker using the tweezers by gripping each side and pulling upwards.

    • Speaker is attached to the back case with adhesive. As such, you may need to use light force to remove the speaker.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Anthony Sou

Miembro Desde 04/22/19

391 Reputación

4 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

UW Tacoma, Team S1-G1, Cardinal Spring 2019 Miembro de UW Tacoma, Team S1-G1, Cardinal Spring 2019

UWT-CARDINAL-S19S1G1

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 109