Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

If your battery isn't working. (on this phone it was bloated and about to burst) here is how to fix it! You will need to remove the back plate and disconnect the old battery to replace it.

Partes

No se especificaron partes.

  1. First, remove the microSD tray, use a sim ejector tool for this. Begin by removing the upper and lower plastic panels. Pry the top with a spudger from the corners as shown in the red circle.
    • First, remove the microSD tray, use a sim ejector tool for this.

    • Begin by removing the upper and lower plastic panels. Pry the top with a spudger from the corners as shown in the red circle.

    • Remove the SIM card.

    • Next pry off the lower plastic panel. This one is stuck on a little bit more.

  2. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

An additional more comprehensive wiki troubleshooting guide for the ZTE Max …compiled by a team of students here on “IFIXIT” that I recently discovered that you may also find helpful.

ZTE Max XL Troubleshooting

Jason Thompson - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 10

Todo El Tiempo: 2,932