Repara tus cosas Comunidad Tienda

ZTE Blade Spark Battery Replacement

Introducción

This guide goes through how to safely disassemble the ZTE Blade Spark and replace the battery. This device contains electrical components, and the repair should be preformed in a dry environment. Replacing your battery is easy and a great way to give your device a fresh start.

Qué necesitas

  1. ZTE Blade Spark Battery Replacement, Battery: paso 1, imagen 1 de 1

    • Apply heat evenly on the back cover using the iOpener to soften the adhesive.

    Editar

  2. ZTE Blade Spark Battery Replacement: paso 2, imagen 1 de 2 ZTE Blade Spark Battery Replacement: paso 2, imagen 2 de 2

    • Carefully remove the back cover using an opening tool.

    Editar

  3. ZTE Blade Spark Battery Replacement: paso 3, imagen 1 de 1

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    • Gently remove the SIM card tray.

    Editar

  4. ZTE Blade Spark Battery Replacement: paso 4, imagen 1 de 1

    • To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

    Editar

  6. ZTE Blade Spark Battery Replacement: paso 5, imagen 1 de 1

    • Set the inner white panel to the side.

    Editar

  7. ZTE Blade Spark Battery Replacement: paso 6, imagen 1 de 1

    • After removing the inner white panel you should see a black panel. Use a Phillips #00 screwdriver to remove the six 4.0 mm screws.

    Editar

  8. ZTE Blade Spark Battery Replacement: paso 7, imagen 1 de 1

    • Remove the black panel, revealing the battery.

    Editar

  9. ZTE Blade Spark Battery Replacement: paso 8, imagen 1 de 1

    • Disconnect the tab connecting the battery to the circuit.

    Editar

  10. ZTE Blade Spark Battery Replacement: paso 9, imagen 1 de 1

    • Remove the battery from the device.

    Editar

  11. ZTE Blade Spark Battery Replacement: paso 10, imagen 1 de 1

    • Place battery off to the side and retrieve new battery.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Andrew Bliss

Miembro Desde 03/27/23

181 Reputación

1 Guía escrita

Insignias: 2

Equipo

IUPUI, Team 1-3, Harley Spring 2023 Miembro de IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 11

Todo El Tiempo: 130