Saltar al contenido principal

Introducción

This guide will demonstrate how to put the camera apparatus back together on a Yuneec Typhoon H, if it has come apart.

Herramientas

Partes

No se especificaron partes.

  1. In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone. Pull up on the tab connected to the camera configuration and slide the entire apparatus off.
    • In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone.

    • Pull up on the tab connected to the camera configuration and slide the entire apparatus off.

  2. Put the gimbal bushings (the  rubber balls) back into the plastic alignment mounts. The circle that is separated from the main body of the bushing should then be inserted into the hole. When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.
    • Put the gimbal bushings (the rubber balls) back into the plastic alignment mounts.

    • The circle that is separated from the main body of the bushing should then be inserted into the hole.

    • When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.

Conclusión

To reassemble your device, simply slide the camera mount back onto the bottom of the drone.

2 personas más completaron esta guía.

Jake Breul

Miembro Desde 16/04/18

127 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S22-G3, Maness Spring 2018 Miembro de Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

4 Miembros

5 Guías creadas

Camera not getting power after crash.

Don - Contestar

Crashed drone and camera not getting power anymore. Nothing appears to be broken.

Don - Contestar

Did steps. Bushings ok. Camera still won't communicate.

vickiesamus - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 12

Todo El Tiempo: 1,081