Repara tus cosas Comunidad Tienda

Yuneec ST10 Plus Battery Replacement

Introducción

If you own a Yuneec ST10 Plus, there is a chance your battery will stop holding its charging capacity over time. The main causes of this issue are battery overheating, and the end of your battery charge/discharge cycles. Follow this step-by-step guide on how to replace your battery. No tools required and a quick replacement.

  1. Yuneec ST10 Plus Battery Replacement, Battery: paso 1, imagen 1 de 1

    • Flip the controller upside down to access the battery compartment.

    • Grab the compartment door and pull down.

    Editar

  3. Yuneec ST10 Plus Battery Replacement: paso 2, imagen 1 de 1

    • Gently lift the blue tab connected to the battery in order to remove the battery from its housing.

    Editar

  4. Yuneec ST10 Plus Battery Replacement: paso 3, imagen 1 de 3 Yuneec ST10 Plus Battery Replacement: paso 3, imagen 2 de 3 Yuneec ST10 Plus Battery Replacement: paso 3, imagen 3 de 3

    • To disconnect the battery from the remote, grab the red and black connectors.

    • Pull gently on connectors until they disconnect.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 10

Todo El Tiempo: 153