Saltar al contenido principal

Introducción

If you are having issues landing your Yuneece Breeze 4K, it is probably due to a leg being broken or chipped. This guide shows you how to safety remove one of the legs and replace it with a new one. We have also provided a link for you that will show you where new replacement legs can be purchased.

Herramientas

No se especificaron herramientas.

Partes

  1. Turn the drone over so the propellers are facing down. Pull the leg up so the leg is pointed up towards the ceiling.
    • Turn the drone over so the propellers are facing down. Pull the leg up so the leg is pointed up towards the ceiling.

  2. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  3. Firmly grasp the leg so it is snug between your fingers. As you are grasping the leg, turn the leg counter clockwise about 80-90 degrees and pull up. This should take the leg out of its socket. Pull up so the leg is out of it's socket. Now you can put in the replacement leg.
    • Firmly grasp the leg so it is snug between your fingers.

    • As you are grasping the leg, turn the leg counter clockwise about 80-90 degrees and pull up. This should take the leg out of its socket.

    • Pull up so the leg is out of it's socket. Now you can put in the replacement leg.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Wes Knutson

Miembro Desde 04/10/18

469 Reputación

3 Guías creadas

Equipo

UW Stout, Team S6-G5, Ogden Fall 2018 Miembro de UW Stout, Team S6-G5, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G5

4 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 11

Todo El Tiempo: 152