Repara tus cosas Comunidad Tienda

Yujin Robot iCLEBO Arte Power Transformer Replacement

Introducción

This guide will show you how to replace the power transformer for your Yujin Robot iCLEBO Arte.

  1. Yujin Robot iCLEBO Arte Power Transformer Replacement, Power Transformer: paso 1, imagen 1 de 1

    • Unplug transformer before performing operations on it!

    • Press on the two black plastic tabs to remove the rear cover for the charging base.

    Editar

  2. Yujin Robot iCLEBO Arte Power Transformer Replacement: paso 2, imagen 1 de 1

    • Remove the long cable from inside the base and gently pull the connector from the base.

    Editar

  4. Yujin Robot iCLEBO Arte Power Transformer Replacement: paso 3, imagen 1 de 1

    • Pull out and remove the old cable from inside the charging base.

    • Detach the thicker part of the cord from the black transformer box.

    Editar

  5. Yujin Robot iCLEBO Arte Power Transformer Replacement: paso 4, imagen 1 de 1

    • Replace the new thick cable with the old cable just removed. Make sure the cable can fit into the wall before discarding the other cable. If you are residing in the US, this is the connector you need to use.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Trent Bingel

Miembro Desde 02/28/17

428 Reputación

4 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

USF Tampa, Team S2-G3, Nance Spring 2017 Miembro de USF Tampa, Team S2-G3, Nance Spring 2017

USFT-NANCE-S17S2G3

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 565