Saltar al contenido principal

Yujin Robot iCLEBO Arte Battery Replacement Guide

Qué necesitas

  1. Yujin Robot iCLEBO Arte Battery Replacement Guide, Battery: paso 1, imagen 1 de 3 Yujin Robot iCLEBO Arte Battery Replacement Guide, Battery: paso 1, imagen 2 de 3 Yujin Robot iCLEBO Arte Battery Replacement Guide, Battery: paso 1, imagen 3 de 3
    • Locate and unscrew the two 15mm screws with a Phillips #2 screwdriver.

  2. Yujin Robot iCLEBO Arte Battery Replacement Guide: paso 2, imagen 1 de 3 Yujin Robot iCLEBO Arte Battery Replacement Guide: paso 2, imagen 2 de 3 Yujin Robot iCLEBO Arte Battery Replacement Guide: paso 2, imagen 3 de 3
    • Remove both screws shown by rotating them counter-clockwise.

  3. Yujin Robot iCLEBO Arte Battery Replacement Guide: paso 3, imagen 1 de 1
    • Remove the battery compartment's lid.

  4. Yujin Robot iCLEBO Arte Battery Replacement Guide: paso 4, imagen 1 de 2 Yujin Robot iCLEBO Arte Battery Replacement Guide: paso 4, imagen 2 de 2
    • Slide the battery out, and disconnect it from the robot by squeezing the tab on the power cable.

    • If you pull too hard on the connector without properly squeezing the tab, something will break.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Trent Bingel

Miembro Desde 02/28/17

428 Reputación

4 Guías creadas

Equipo

USF Tampa, Team S2-G3, Nance Spring 2017 Miembro de USF Tampa, Team S2-G3, Nance Spring 2017

USFT-NANCE-S17S2G3

4 Miembros

14 Guías creadas

Un comentario

Tried 2 different new batteries and still won’t charge

desrn55 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 10

Todo El Tiempo: 2,710